Are Fangs Worth It On Onewheel?(See Guide)

Are Fangs Worth It On Onewheel?

Note: As an amazon associate I may earn a small commission from qualifying purchases if you click to amazon from my site and choose to make a purchase.You can read my complete affiliate disclosure for more details

Are Fangs Worth It On Onewheel?

Nosedives are the most dreaded encounters in Onewheel. If you have ever experienced a nosedive, you will want to do anything possible, never to get there again.

On the other hand, if you haven’t experienced a nosedive, thank God and ensure that you avoid them. But this is not easy to achieve.

However, fangs have been marketed as having the capacity to prevent nosedives. So you might ask, are fangs worth it on Onewheel?

Yes. Fangs will eliminate nosedives, But you will decide whether to use fangs or Minis, the latter are the smaller versions of Fangs. When it comes to their functionality, Fangs act like bumper wheels.

Fangs will work flawlessly on all smooth surfaces such as pavements and bitumen roads.

Indeed, Onewheel nosedives can be eliminated easily.There are several ways of achieving this objective, including riding techniques that reduce the risk of nosediving.

However, a more practical and effective way of eliminating nosedives is by installing Onewheel Fangs.

These are products made by Land-Surf, the two newest versions being Fangs 2.1 and Minis 2.0.

You may not find them very different from training wheels used on bicycles.

These products are handy in drastically reducing the possibility of a nosedive while riding your Onewheel board. Nobody wants a nosedive.

While Onewheel Fangs work, they can never be seen as completely foolproof.Their effectiveness is limited to certain riding conditions.

For example, Fangs will work flawlessly on all smooth surfaces such as pavements and bitumen roads.

However, the same effect is scarce when riding on uneven surfaces (e.g., on bricked pavements) or off-roads.

This is because it’s given for the fangs to hit the ground first on smooth and flat surfaces before the board’s nose, helping you to ride out of a nosedive.

Some riders are even taking advantage of Onewheel fangs by purposefully dropping the nose of their Onewheel board.

To touch the ground by pushing down the nose to land on their Fang wheels.

They then ride along with the deck’s fangs touching the ground in what they have dubbed the ‘Fang Drag.

What Do Onewheel Fangs Do?

Onewheel Fangs are installed beneath your deck’s front footpad, at the front of your Onewheel board.

The exact spot is at the cutout where the Onewheel’s headlights are positioned.

Due to their strategic positioning, it’s easy to reduce the tendency to the infamous Onewheel nosedive.

A nosedive results from an imbalance between the board and the rider.

In proper wording, this is when they overbalance. Such forward overbalancing is a result of a number of reasons.

For instance, if you push too hard to increase speed, you prepare the ground for a nosedive.

This is because all your weight is brought forward over the board’s front, and this will cause the nose to touch the ground.

Again, a low or flat battery will also cause a nosedive.

If your Onewheel is low on battery, it has less power to delegate to auto-balancing (Onewheel is a self-balancing board).

This means that your balancing mistakes cannot be corrected by your wheel. If your battery is completely drained out, it will cut off when you are riding.

If this happens, your board will catch on the ground and consequently throw you off its deck. This is where Fangs come in handy.

Their main purpose is cushioning your board’s nose if it touches the ground, technically lessening the chance of a nosedive.

Onewheel Fangs are great on smooth surfaces as they will even allow riders to try new tricks of riding their wheel.

However, the same cannot be said over uneven and rough surfaces.

And as much as Fangs will help you ride out of a Onewheel nosedive, they might not be of much use when riding off-road.

On the contrary, they can get snagged on obstacles while riding on uneven or off-road surfaces.

How Do You Install Fangs On Onewheel?

Thankfully, installing Fangs on your Onewheel is an easy task that will not take much of your time.

Therefore, if you have decided that Fangs are worth your money, you will find it easy to learn how to install them and start enjoying their benefits.

To install Onewheel Fangs, you will need to acquire the kit. Luckily, the kit comes with a manual with all the details you will need in this procedure.

The first step will be to unscrew the bolts holding in place the front footpad.

These are four where two are on the footpad’s top while the other two are underneath the footpad, in front of your board’s headlight.

After removing the footpad bolts, lift the footpad towards the guard but ensure you do not excessively strain the cable attached to the footpad’s underside.

Therefore, make sure that you keep it very close to the wheel guard.

Proceed to apply some superglue (if you want) around the nuts seated within the wooden footpad. This will reinforce the wood around this area.

This is handy in preventing the footpad from splitting and breaking under the force produced as the Fangs are used while riding.

Now it’s time to replace the footpad to its original position. Proceed to re-screw the rear bolts. Ensure all are re-screwed back into place.

After this, use the new bolts and nonslip pads provided in your Fang kit to secure the Fang wheel brackets in place.

Start by placing the non-slip pads at the bottom of the brackets. After this, simply push the bolts through the bracket holes.

Since these bolts are prone to coming out while riding, it’s advisable to use a little thread lock and prevent this from happening.

Proceed to ensure the bolts are put in place and well tightened. However, avoid over-tightening them since this can split your board’s front footpad!

Now, you are ready to push the spacers and bearings into the Fang’s wheels. Start by pushing the first bearing and then continue by pushing the spacer.

After the spacer, push in the second bearing. Do the same to the other wheel.

Lastly, secure the Fang wheels within the wheel brackets. First, you need to take a bolt and then hold it on the wheel’s outer bracket side.

Place a washer on the inside of the bracket. After this, push the wheel and another washer to separate the wheel and the other inner side of the bracket.

Proceed to push the bolt and secure it with the provided nut. This should be repeated on the other side.

Congratulations! You’re all done.

Onewheel Fangs 2.1 And Minis 2.0 features

Onewheel Fangs 2.1 is different from Onewheel Minis 2.0.

When you place Onewheel Fangs 2.1 besides Onewheel Minis 2.0, your attention will be drawn to the fact that Fangs 2.1 has larger wheels.

The wheel measures 35mm in diameter. On the contrary, Minis 2.0 has a smaller wheel that measures 25mm in diameter.

This means that Onewheel Fangs will be better at handling rough surfaces.

On the other hand, Minis 2.0 are more discreet and smaller, having a compact design that is hidden inside the Onewheel nose’s bumper recess.

These are more recommended for those riders who have a strong grip of their wheel that comes from years of experience.  

These are the riders who wish to experience lesser friction of the Onewheel nose on the pavement. Such riders also love doing Fang drags.

And these create the perfect condition for this. Indeed, Fang will not thrive unless done on smoother surfaces.

However, if you are undecided between Onewheel Fangs 2.1 and Minis 2.0, you can opt for regular Fangs. But this will be best as a place to start.

The Full-size Fangs (2.1) keep your Onewheel’s nose a bit higher off the pavement, extending down from your front bumper than what you would have in the Minis. 

Fang Minis 2.0 comes as compact and streamlined. Consequently, your Onewheel’s nose sits closer to the ground as you roll.

This makes it easier to stay on with full-size Fangs 2.1, as the nose does not sit at such a steep angle as when using Minis. 

This stresses the need for Minis to be used by experienced riders only to drag the nose (Fang Drags).

They can also use it when they want less drag when the nose does a touch-and-go.

Does The Pint Come With Bumpers?

Yes. As part of the accessories in the box, the Onewheel Pint comes with bumpers.

Onewheel Pint is a playful, tiny, nimble, light, lively, slightly cheeky but responsive transport device. It guarantees a covetable riding experience for everyday adventures.

This is a handy device in everyday commuting very useful in suburban settings. However, this does not mean that it’s not ideal in urban settings as well.

During rush hours, you will find Onewheel Pint very useful to maneuver shortcuts to your desired destinations within a reasonably short time.

You will need this small agile Pint for this type of ambiance since it’s easy for you to turn on Onewheel Pint due to its smaller and rounder tire that bears a narrower foot stance.

While Onewheel Pint comes with bumpers, it also comes with fenders and a mag handle.

Additionally, you are free to choose from the different shades in which all spares come.

This makes it ideal for picking the color that will complete your combination to characterize you.

And because there are rainy days to think of, you will want to install fenders as well as a cover that will protect your charging port.

This will come in handy in giving your Pint longevity.

Vinyl rail protectors will work fine to ensure your Pint doesn’t look battered a few weeks after you buy and start using it.

Onewheel Pint is associated with many Pros. For instance, this board is lighter compared to its predecessors, making it your ideal companion when traveling.

Again, it uses the attest technology used by Future Motion Inc. on boards’ manufacturing this far.

When you think of its simple stop feature, you will hardly appreciate the advanced technology the device uses.

Indeed, SimpleStop is handy when dismounting or when you desire stable braking. This is especially important for newbies in Onewheels.

However, even if you are an experienced rider and do not wish to use this feature, you can disable it just like Pushback.

Additionally, this board is very friendly when turning as it offers and guarantees easy and safe turning.

This gives you a zippy and agile riding experience. What’s more, you will be paying less to buy Onewheel Pint as it comes at a retail price of $950 or £1,050.

This is far from what you pay for Onewheel+ XR.

Fangs™ V2 Bumper Wheels for Pint

FANGS™ V2 comes in a new design that fits your Pint. These are the 5th generation of bumper wheels.

Fortunately, they have the same size axles, wheels, and screw lengths that make them work for the V2 and V1.

Fangs™ V2 Bumper Wheels for Pint are offered in classic colors that match the stock Pint® bumper colors.

This is handy in allowing you to keep your color scheme remain intact.

Fangs™ V2 Bumper Wheels for Pint come with twin stainless steel ball bearings available on each wheel.

These are custom-designed urethane wheels on Titanium (6Al4V) axles. This is what you need for your adventure with your Onewheel Pint.

Fangs™ V2 Bumper Wheels for Pint keep the rider’s turning clearance and hill-climb angle very intact with its unmatched sleek design.

This enables you to gain a usable handle at the board’s front as a bonus!

Authentic Fangs have an incomparable finish. That makes it your best choice as you choose the best in the market when you choose Fangs V2.

All the same, FANGS™ are an experimental product. It’s being sold as a pilot program, and therefore, they come with no guarantees when it comes to saving you from all nosedives.

However, many riders have proven that they work time and again.

Indeed, as you look for things that can save you from nosedives, it’s critical to be a bit practical; do not accelerate too hard for a given speed, and you will be safe from nosedives.


Fangs are worth it, and they are an accessory you will want to install.


Hi! I' am Tom. I faced many questions from customers about different products, and there was hardly any help on the internet. After learning all the things about these products as a manager the hard way, I decided to start a blog and help other people.

Recent Posts