Can A Onewheel Get Wet?(Guide)

Can A Onewheel Get Wet?

Note: As an amazon associate I may earn a small commission from qualifying purchases if you click to amazon from my site and choose to make a purchase.You can read my complete affiliate disclosure for more details

Can A Onewheel Get Wet?

On any surface, riding your Onewheel, either a Onewheel XR+ or Onewheel Pint, will give you an amazing experience.

But have you ever considered taking your Onewheel to the beach to enjoy your ride there?

This is a temptation that a few will overcome unless you have strong, compelling reasons why you shouldn’t ride on the beach.

You know how appealing riding along the white or golden sands of a beautiful beach, clear blue waves crashing beside you can be!

But riding on the beach will certainly expose your board to wet conditions. So, you might ask, can a Onewheel get wet? The short answer is No.

Since Future Motion has neither designed Onewheel’s as waterproof nor advertised them as being waterproof.

Yes, super wet conditions like those in the swash zone are not ideal riding conditions for your Onewheel. However, Onewheels are water-resistant to a certain point.

But they are water-resistant up to a point, meaning you can expose a Onewheel to small amounts of water without getting too worried about damaging them.

However, you might want to know that even the smallest amount of water has the potential to damage your Onewheel if it gets in the wrong place.

And this will dictate your board being sent back to one of Future Motion’s repair centers. Unfortunately, you will be paying for the repairs, and they can get rather expensive.

This is a particular worry with water and other wet conditions.

How Do You Clean Onewheel After The Beach?

It’s indisputable that the Onewheel is made of very sturdy stuff.

However, if you want to get the best out of your board, you might need to practice a bit of upkeep and maintenance on your board.

Indeed, the Onewheel community is abuzz with seasoned riders praising the Onewheel for how robust it is.

After racking up hundreds of miles and cruising through rainstorms, they have so much to say about the durability and reliability of Onewheel boards.

After putting their boards through numerous wipeouts, they still haven’t had any problems.

Sure, Future Motion has built a tough board, but it boils down to the upkeep and well-timed maintenance on the part of the rider.

After riding your Onewheel on the beach, avoid rinsing off the board. This is because the potential for water damage is quite high.

This is what I do, and it has worked every time: when I get home from my ride on the beach, I get hold of my board and a brush.

I always shake the board and brush off any excess sand. After this, I use a damp towel or rag to get anything else off my board.

But you will agree that this might not work that easily on the grip tape, which is a little harder to clean. Instead, I make use of a rubber cleaning stick.

However, sometimes I prefer dry cleaning my Onewheel instead of rinsing it. To do this, I use compressed air and blow out any debris in the charge port.

But a scrub brush will never disappoint in loosening and removing any debris and dried mud.

How Do You Clean A Onewheel Pint Footpad?

Your Onewheel Pint comes with stock grip tape on the footpads. This is meant to hold your feet in place and prevent falling off due to sliding.

These will get dirty, as is the case in skateboarding. In addition to getting dirty, they also wear out over time, making them less effective.

While it’s advisable to clean the grape tape, it’s not an easy chore. However, you can do certain things to increase grip and prolong traction.

For instance, a brush down with a handheld brush after your ride on the beach can go a long way in ensuring your Pint’s footpad remains clean.

Additionally, you can cultivate a tendency to dry the grip tape with a dry cloth anytime you ride in wet conditions, as this will help in the long run, prolonging your board’s lifespan.

Still, you can use a griptape cleaner stick to clean your grip tape, but this should be done after the grip tape is dry.

If any dirt or debris has built upon the footpad, this kind of stick will get rid of it, breathing some new life into your rides.

Best Way To Wash Off Onewheel?

When it comes to washing your Onewheel, there is one thing we need to get out of the equation – you will not be using water! This is because of the exposed ends on the plugs.

You do not want to wet these as they can cause issues if they get wet. You will always need to remember that your board is water-resistant, not water-proof.

Therefore, getting water underneath the footboards is something you don’t want to since the electronic components are there.

Although the area has seals, who knows when the seals will have taken their share of wear and tear to the point of not being in a position to prevent water, leaving the area vulnerable?

Although I at times ride through water puddles a few inches deep (when I have to), I will not ride into water that I don’t need to get into.

It’s tempting to ride into the water. Still, because I am keen on my expenditure.

I will automatically avoid getting into the water for fear of the unforgiving and costly repairs.

If you do not want to use a brush in cleaning your Onewheel, let it dry (if you are sure no water got inside), and then take a towel and brush your board lightly.

You will notice that dirt and sand will fall off right away. While my preferred way of cleaning might not suit your condition, all you want to avoid is using water to clean your Onewheel.

Maintenance Upkeep For A Onewheel

Regarding maintenance on your Onewheel, some specific parts and components will require regular maintenance.

For instance, you will need regular maintenance on the grip tape. This is something you will need to replace every 200 to 300 miles.

This is a key area as your grip will dictate your overall safety on the board. Indeed, good grip equals good control. With good control, you can be sure of better rides.

But if you have worn out grip tape, your feet will be susceptible to slipping during high speeds. And yes, you will not be able to kill those sharp carves!

Another area that needs regular maintenance is the battery.

Future Motion uses two types of batteries on Onewheel, including OW + lithium iron phosphate battery and OW + XR nickel manganese cobalt oxide battery.

These two batteries are famous for their long lifespans, surviving thousands of cycles.

Consequently, you can enjoy several years with your battery. But that will require proper care and upkeep.

For instance, if you rarely use your board, you will still need to charge it every other month.

This is good practice to safeguard your battery, but it will also keep your warranty valid.

And you want to do it Future Motion’s way: occasionally, leave your Onewheel charging overnight to rebalance. 

Again, ensure that your board is stored at room temperature, preferably indoors.

As you continue riding your Onewheel, it will become more apparent to you that a quick clean after a day’s ride can’t hurt.

If you have been riding in good weather conditions, taking a few minutes to wipe down your board with a dry cloth is invaluable.

But if you were riding over grit, sand, or ice, then you’ll need to take it a bit further. If your rails remain fresh-looking, you will have to wipe them after every ride.

Having your charging port plug is also good as there is no better way to stop water or grit from getting into the electrical circuit.

Can I Ride Onewheel In The Rain?

Yes, but whether it’s safe or not safe to do so is a different thing altogether. But one thing needs to be addressed, and this is the rain itself.

Indeed, much will depend on the rain intensity. While a drizzle and light rain will unlikely harm your Onewheel, you will want to avoid completely wet streets.

There are too many risks that are associated with riding a Onewheel in the rain. For instance, it’s easy to slip and fall when riding over a wet surface, but that’s not all.

If water makes it into the board’s interior, you will be starting at a possible breakdown that will cost you dearly.

Therefore, avoiding the rain doesn’t make you a lesser man – it only shows that you care for your board and are unwilling to incur foolish costs.

But you might find yourself in a situation where you need to ride in the rain, like if rain catches up with you from nowhere and you are in an unsafe place.

In this case, ride on, avoid puddles of water, and don’t stop until you get under a shade. Proceed to wipe your board and ensure it is dry before you can charge it.

Another weather condition that you need to avoid is driving on roads that are buried in snow.

If you are conversant with what water has to do with your Onewheel, your chances of having your board for a longer time increase.

Indeed, the less your board gets into contact with water, the better. But you will say, my Onewheel is water-resistant! Sure it is. Nobody disputes that.

But get to know that it won’t brave water getting into your board, all the way to the electrical part. And what happens after that, your guess is as good as mine.

Anyone knows that electronics and water do not get along well. Again, Future Motion doesn’t say your board is waterproof.

As long as your board is classified as water-resistant by the manufacturer, at best, it has the lowest level of water repellant protection.

While it might have hydrophobic coatings that boast a good water-repelling feature.

You still will be better off if you avoid any urge to submerge your Onewheel in water or ride it in heavy rain.

Best Onewheel Shoes

After Future Motion came up with their invention of the Onewheel, the challenge now remains on riders and manufacturers of appropriate accessories.

Appropriate Onewheel shoes remain a major concern for many new entrants into the world of Onewheel. 

For those trying Onewheel for the first time, the good question is, what are the best shoes for Onewheel?

This is because they are the interface between the rider and the board. My shoes apply pressure that activates the front pad sensor making my board move.

In Onewheel boards, getting good sensor activation is a key part of riding your Onewheel and enjoying a good time on the board.

Therefore, you will need to use a shoe with a flat sole. This is key in even application of pressure across the whole front foot pad, enhancing good activation.

Shoes with raised heels or gaps are the best recipe for uneven pressure distribution, risking the board thinking your foot is off the sensor.

While activation is important, the feel of the board is more important. The shoe I wear goes a long way in getting that connection that makes me one with my board.

This is an area the skateboard industry has been working on perfecting for decades.

Key features of a good shoe will include a wide flat sole. Another feature that makes for a good Onewheel shoe is a high top for protecting your ankles.

The best shoes for your Onewheel are Vans Ave Pros and Nike – SB.

How To Waterproof Your Onewheel Shoes

First, you can use beeswax or a colorless candle to waterproof your Onewheel shoes. Use un-dyed wax as it’s the best.

Alternatively, you can use a textile-based waterproofing spray. Although you can waterproof just about any shoe, you are assured of better results with a more absorbent fabric.

Your wax will settle nicely into the woven fibers of fabric shoes. On the other hand, if your shoes are made of leather, they will form a coat on their surface.

This might wear off faster than the fabric’s case.


A Onewheel can get wet, but its safety will be compromised.


Hi! I' am Tom. I faced many questions from customers about different products, and there was hardly any help on the internet. After learning all the things about these products as a manager the hard way, I decided to start a blog and help other people.

Recent Posts