Note: As an amazon associate I may earn a small commission from qualifying purchases if you click to amazon from my site and choose to make a purchase.You can read my complete affiliate disclosure for more details
Can I ride Onewheel on the beach?
The holiday is here, and you want to get to the beach so bad that you stay awake all night making preparations.
But wait, what about your much-loved Onewheel? Can you carry it with you to the beach? Or, can i ride Onewheel on the beach?
Since Onewheel is mainly used to move along dry surfaces such as the pavements and the street paths, a lot has not been done to ensure it remains waterproof.
Yes, it’s water-resistant, but exposure to a lot of moisture that may happen while at the beach could jeopardize the entire operation. You can ride your Onewheel on the beach after taking a series of precautions.
Also, you wouldn’t want to carry along the onewheel only to get damaged before you have enough fun.
You may think that Onewheel may not be able to maneuver through the sandy terrain, but this is not true.
Onewheel is designed to move through different landscapes with much ease.
They can be ridden on rough and smooth terrains alike, so the beach is sandy does not have much to do with you riding the Onewheel or not.
However, it’s the water splash and those that come to shore in the form of waves that you should be worried about.
A tiny amount of moisture getting in the wrong part is enough to stall your Onewheel.
Can I make my Onewheel waterproof?
Yes, you can try to make your Onewheel waterproof. By trying, I mean you may not end up with a thoroughly waterproof outcome.
Still, you shall have significantly reduced the rate at which water may get into the most sensitive parts, especially the electrical areas responsible for propulsion.
So how do you do it?
You will need to cover up the exposed areas, more so the ones with electrical parts.
These areas should not get in contact with water since the slightest drop of water may send you to the repair shop sooner than you think.
Saltwater is not good with electronics, and sometimes after contact, the damage may be so severe that you end up budgeting for new replacements.
Well, I bet you do not intend to carry along your Onewheel to the beach with a whole inclusive budget to carter for replacements.
Some of the parts you may need to use in covering your Onewheel have been specially designed by various onewheel companies, while others may also be customized.
Either way, you will still need to part ways with some cash to acquire these parts from amazon or other dealers handling such customization.
Therefore, making your Onewheel waterproof is possible. However, even after that, you will still need to take caution whenever you ride along the beach in areas prone to water splashes.
It’s advised that you should avoid riding in water since you may not know the integrity of the waterproofing done on your Onewheel.
Well, it’s just a precaution as it should be handled as it is.
When should I ride my Onewheel on the beach?
Well, we have already noted it’s possible to ride a Onewheel on the beach, but when is the ideal time to do so?
You may ride your Onewheel on the beach whenever you want to. However, different riding times may pose other riding conditions.
For instance, it would be best to ride when the low tide is receding.
There are few risks of your Onewheel getting soaked in saltwater during this time, a mistake you would want to avoid.
Furthermore, when there is a receding low tide, a significant length of sand is left behind, which is excellent to ride upon.
Also, there will be meager chances of being surprised by a sudden splash of waves which may affect your Onewheel’s entire electronic system when water gets in.
The receding low tide is an ideal time for you to ride your Onewheel on the beach.
So, since you are looking forward to riding on the beach, head there when the tide is low and receding.
What type of sandy beach terrain should I ride upon on my Onewheel?
The best type of sand you are most likely to have more quality riding time is the hardpacked type.
This type of sand is saturated; hence you will not need a lot of power to maneuver through, unlike the loosely packed type.
However, you should also ensure that the sand is not too wet as wet sand is sticky and may not result in the desirable riding outcome or that you had figured in your mind.
So, ensure the sand is neither too dry nor too wet since the dry sand poses a grip challenge to the wheel.
The other relatively vital consideration to make when you want to ride your Onewheel on the beach is the size of sand particles.
The preferred particles should be medium in size, not too coarse, and not too fine; otherwise, you may end up having more frustrations than the fantastic fun you had insinuated.
Does the type of the beach affect my Onewheel’s battery life?
Yes, the type of beach upon which you are riding your Onewheel will impact the battery life. Hardpacked sand is easier to ride on.
Such sand conditions will tremendously improve your riding experience as well as improve your Onewheel battery life.
Well, let’s say the battery will last as long as it’s expected to last while operating under normal circumstances.
However, while riding your Onewheel on the loosely packed sand, it will be doing more work while moving through, thus using more power. This will ultimately result in reduced battery life.
Therefore, if you intend to have more riding time backed with more fun, you should always consider riding on the beach with hard-packed sand;
The loosely packed sand beach will only lead to frustrations. But, hey, you went to the beach to have fun, right?
Can you ride a Onewheel on wet roads?
Yes, you can ride a Onewheel on wet roads. Well, as long it’s not submerged into water. The Onewheel can move on wet roads efficiently and may not incur challenges.
The only problem likely to occur is interference with the electronic part. A slight splash of water from the road into the Onewheel’s a sensitive electronic part, and it’s game over.
You will probably lose propulsion as you contemplate getting it fixed; water and electric energy are not a combination.
So, perhaps if you are planning on enjoying your Onewheel rides on wet roads, then perhaps you should opt for waterproofing options.
Doing so will ensure you are covered from any surprising plunges and splashes.
Only keep in mind that it’s not a complete guarantee but a precaution. Okay, still better than none and more reassuring.
Is Onewheel Pint waterproof?
No, there isn’t any Onewheel that is waterproof.
However, they are water-resistant and can only exercise this characteristic to a certain degree of moisture exposure, after which the water-resistant property becomes void.
Therefore, always be mindful of the locations at which you ride your Onewheel and whether you are exposing them to the amount of moisture within the levels they can resist.
Should I clean my Onewheel after riding on the beach?
Yes. Once you are done having fun with your Onewheel at the beach, you must see that it’s adequately cleaned.
Sand particles and the saltwater which may still be in contact with your Onewheel should be cleaned.
However, you should pay attention to other vital factors involving the entire cleaning process.
Well, you may be wondering, why not just rinse your Onewheel in water and get it done with? The short, direct answer is; don’t.
Instead, use a soft rag, preferably damp, to wipe off the dirt and sand particles as well as saltwater.
Also, when making the towel or rag damp, you should use fresh water and not saltwater.
Is it wrong to leave my Onewheel in the sun?
Yes, leaving your Onewheel in the sun is wrong. At first, it may not seem like it, but the evidence may appear sooner or later.
One of the Onewheel parts likely to be affected by overtime exposure to sunlight is the deck.
Exposure to heat leads to the peeling of the grip tape, which is held in place by adhesives.
This is more likely to occur at the beach, where the temperature is relatively high.
A peeled grip tape is loose and quickly shifts. You wouldn’t want that, especially when you are riding.
Also, there are high chances that you will take an unannounced dive into the sand while riding your Onewheel if it has sliding grip tape. Well, that won’t be very pleasant.
Instead of exposing your Onewheel to the sun all through, always consider leaving in a shady place when not riding, especially those times you take a break for a beer or refreshments.
How do you maintain a Onewheel?
Just like any other machine, Onewheel also needs pretty much attention.
One of the common ways of maintaining a Onewheel is ensuring it’s cleaned at the end of each day’s use.
After your daily rides, get hold of a towel and gently wipe the dirt which may have been accumulated in the process. Once done, store it in a safe place and ready for use next time.
Apart from the regular cleaning, the tire pressure is also an area of concern that should be looked at.
Always ensure the tire has adequate pressure, with the standard one being 20 PSI.
However, different Onewheel owners often have other tire pressure preferences which they want to be riding at.
Tire change: When changing Onewheel tire, some riders often consider the distance they have covered while riding.
Most Onewheel tires have a life span of about 1000 miles, after which it’s recommended you get a tire change.
However, despite these stipulations, changing your tire after one year should be the option to go for.
After a year, you have covered a considerable distance, and the tires are on the verge of wearing out.
Maintaining the grip tape; grip tapes are responsible for holding your feet to avoid sliding off the Onewheel as you ride.
You should often clean it using a brush to increase grip and also prolong its traction abilities.
If the grip tape(Amazon Link) is adequately maintained, you will ultimately have better control of your Onewheel, which translates to more fun rides.
Should I clean my Onewheel’s fender?
Not all Onewheel’s have fender installed since some riders prefer having it on while others do not.
So, if you are a fender(Amazon Link) enthusiast, should you clean the fender, and if yes, how often should you do it?
The fender is part of the Onewheel, and during maintenance checks, it should be included on the list. It should be cleaned along with other parts of the Onewheel.
The fender plays a crucial role in ensuring you have a comfortable ride by preventing sand and dirt pellets from hitting your ankles and lower parts of the leg.
After one month of use, you should detach the fender from the one wheel and give it a thorough cleaning by removing dirt particles that may have been embedded as you ride.
Once done, install it back again and enjoy another month of service.
Riding a Onewheel on the beach should not be much of a big deal, especially if you have been thinking about it.
You can ride your Onewheel on the beach whenever you want to.
But there are precautions you should have in mind anytime you hop onto it and begin to enjoy your ride.
Always be mindful of the type of beach you are on and the tides.
You may also decide to customize your onewheel further to increase its water-resistant ability to enjoy more rides with fewer worries.