Do I Need Onewheel Charge Port Covers( Yes! See why)

Should I buy a Onewheel Pint or XR?

Note: As an amazon associate I may earn a small commission from qualifying purchases if you click to amazon from my site and choose to make a purchase.You can read my complete affiliate disclosure for more details

Do I Need Onewheel Charge Port Covers

While your Onewheel board is water-resistant, it’s not waterproof. That should say and mean much to any Onewheel owner.

But that scarcely means that you can’t protect your board’s internals from elements. It’s possible to protect your investment.

There are delicate parts that need protection, including the charging port and the power button. So, you might be asking, do I need Onewheel charge port covers?

Yes! You will need Onewheel charge port controllers to provide a level of water protection to your board. Charging port and the power button should be protected to keep mud and water away.

Indeed, the most vulnerable parts of your board can be protected by investing a few dollars in this venture.

Using Neutrik XLR Receptacle Covers can keep mud and water out of your charging port.

On the other hand, a pack of Clear Silicone Waterproof Rocker Switch Caps will keep sand and water out of your power button.

However, if you don’t ride apart from perfectly paved streets, dry and puddle-free, you do not need to cover your power button and charge port.

But if you ride on trails or at the beach, or in wet conditions, you need to seriously consider covers for your Onewheel’s charging port and power button.

I know you might have seen videos of people cruising their board through water or wet sand and found yourself wondering about the Onewheel board’s capability and protection.

But if you spend a little time researching the discussion boards, you will be worried by the scores of boards that have died from water damage.

Can Water Damage My Onewheel?

Yes, water will easily damage your board and render it inoperable. When this happens, you will be headed for Future Motion’s repair shop.

And you know that will cost you dearly. There is a reason why Future Motion will not extend their Onewheel’s warranty to accommodate water damage.

Their boards are not designed to be waterproof.

If you feel the urge to ride your Onewheel board on the beach, never try to get your board wet, as this would risk water damage.

There is always the risk of getting the wet sand into your charging port, and this can never be any good to your board.

While you can always completely clean and dry the port before charging your Onewheel, it’s advisable to use charge port covers wherever possible.

Indeed, this is a good solution that will deal with the issue of water and debris in the charge port. The one I use fits firmly into the port.

And it’s a universal cover that will work both for the XR and the Pint. What’s more, it is inexpensive.

Apart from the concern that water might find its way into your boars through the charging port, another significant problem is when cruising on the beach is the soft, fine, dry sand.

In addition to making riding on the beach extremely difficult, the soft, fine, dry sand will also find its way into the power button’s tiny gaps, making the power button catch and stick.

Once sand gets into these tiny gaps, you will agree that it won’t be easy to get it out. Therefore, you want to get these areas covered by silicon covers.

What Are The Best Top 5 Main Onewheel Charge Port Covers

One of the most overlooked Onewheel Accessories is a Onewheel Plug Cover. Unfortunately, this mostly leads to costly repairs that could have otherwise been prevented.

A good example of a Onewheel Plug Cover is a simple XLR dummy plug that will act as a real Onewheel charging port plug.

Indeed, a Onewheel Plug Cover comes high up on your list of must-haves as far as Onewheel accessories are concerned.

While your Onewheel will appear like it doesn’t need charging port protection from the box, it will get beaten up with time and use.

Although you can use protection accessories, including Sidekicks in protecting your rails and Float Plates in protecting the controller and battery cases.

Both offer no protection to your charging port, leaving it vulnerable to damage.There are various options for your Onewheel charging port plug that you can use.

For instance, you can use products designed and marketed as ideal for using Onewheel, including the Plugbrush and XLR Dummy Plug designed for capping off unused XLR plugs.

But as you search for an XLR dummy plug for your Onewheel Plug Cover, take note that your Onewheel charging port is an XLR Output (male).

And because you want to cap an output socket, you will want to buy/order a female plug.

Tethered Charge Port Cap

This is a plastic cap that fits your Onewheel charge port nicely and tight.  In the unlikely event that it might fall, you will never lose it as it has a tether for preventing it from being lost.

This is one worry less! Additionally, it cannot contact the charging throngs since it doesn’t come into contact with them.

This comes as a reprieve for owners of either the Onewheel Pint or the Onewheel original as it’s compatible with both.

Additionally, it helps reduce the amount of dirt even as it combats water that splashes into the charge port. 

But as I mentioned, I reiterate that your Onewheel will not become waterproof simply because you are using this cap.  

The Tethered Charging Port Plug for Onewheel is manufactured by Craft & Ride and will cost you only $4.99. You will get a discount based on the quantity you order.

It comes with a hassle-free return policy. This accessory will protect your Onewheel+ XR’s charging port plug from debris and water.

Can Onewheel Pint Go On Sand?

Thanks to the tether, since you can’t lose it, it saves you money in the long run. It will protect your investment.

Additionally, when you want to charge your Onewheel, this Tethered Charging Port Plug is easy to remove.

After which you can return it in place without the need to hold or set your tethered plug down.

This plug cover is not compatible with Onewheel GT, Onewheel Pint X, and Onewheel Pint. This means that it is compatible with Onewheel+ XR, Onewheel+, and original Onewheel.

How Do I Ride My Onewheel On The Beach?

It’s a risky affair to ride your Onewheel on the beach.

But your passion for the beach may take the better part of you and find that you cannot resist the urge to take your Onewheel to the beach.

When you decide to ride your Onewheel on the beach, you open an avenue through which water and sand can get into your board. This is not anything you want, I know.

But it’s the reality. However, if you use rubber plugs to protect all openings, holes, and vents on your board, you might get away with your risky venture and be fine.

Remember, when addressing the sand, you will also be addressing water as it contains water too. And you know how corrosive this water can be at times!

But if water and sand find their way into your board, it will be necessary to use some tools to get it out. While you can wait for the water to dry, it will not be that easy for the sand.

Can I Make My Onewheel Waterproof?

No, not exactly. But if you are good at DIYs, there should be no problem waterproofing your Onewheel board. Your Onewheel board is designed as water-resistant.

This means that it will offer some water protection but not to the level of waterproofing. However, you can do a DIY project to make your board waterproof.

This is for those whose needs are beyond what can be catered for by charge port covers. To do this, you will need to use super thin silicone and seal up all the ports.

Mix the flowable silicone with a white spirit in the ratio 1 to 1 mixture. You are looking for the consistency of maple syrup since you need only a little.

It cannot be as thick as honey, neither should it be as thin as water. It has to be quite runny. Alternatively.

You can mix up some epoxy and then spread it on the edge of the footpad, sealing it. However, you will want to make sure it is cleaned well before attempting this.

After cleaning it, wipe it dry and then apply your epoxy. Another way to waterproof your board is to spread silicone around the led strips, where the clear plastic meets the housing.

Alternatively, you can use sticky foam tape to go around the bottom side of the footpads.

But if you are too lazy for this like me, go for a large foam sheet and use it to coat the entire bottom.

After putting the footpad on the foam sheet, proceed to cut around it and then stick it on using a good spray adhesive or glue.

All you want to do is create a tight seal to make it difficult for water to get between the footpad and the bumpers/rails and on your battery/controller module.

You will need to make a hole so that the cable goes through for the front footpad. Use a strip of foam tape to keep the top of the footpad from getting any water.

If water gets under the fenders, there are increased chances that it will get onto the footpads.  

Does My Onewheel Warranty Cover Water Damage?

No, Future Motion explicitly states that their board is water-resistant.

While this might seem a harmless claim, it might be designed to lure ignorant buyers who do not understand the difference between water-resistant and water-proof devices.

So, Future Motion might be employing dirty games when they say the board is water-resistant since, technically, it’s water-resistant. So, what does the warranty cover?

First, Future Motion categorically states that it won’t honor any warranty if the vehicle in question was bought from unauthorized resellers.

Including all online purchases other than directly done from Future Motion.

The warranty covers the PRODUCT (apart from the footpad, tire, and battery pack) and guarantees it will be free for 12 months or 2000 KM (1243 miles).

This will depend on which of the two comes first.

On the other hand, the footpad, tire, and battery pack enjoy a warranty limited to only six months or 1000 KM (622 miles), whichever comes first.

If you find that your Onewheel board is defective (and file a claim during the warranty period), the COMPANY will address this.

It might repair your product through email support, telephone support, or repair the product for free.

The company might also choose to replace your board with a similar board, new or refurbished.

Still, the warranty states that the company might refund the original amount paid, less a reasonable amount for usage, upon its return.

Note that all sales made by Future Motion are final. There is no mention of any warranty or water guarantee.

Water In My Onewheel Charging Port

The last thing you want is water in your Onewheel charging port. And that’s why products like charge port covers are available.

While it will help prevent water from getting into your Onewheel charging port, a charge port cover cannot help you if water is already in the charge port.

So, what happens once that water gets in there?

First, let me assume it’s just a small amount of water that accidentally finds its way into your port.

By now, you know that your Onewheel is not waterproofed, so you didn’t get this water from submerging it in water.

I also assume you didn’t get water into the charging port by riding in puddles of water in heavy rainfall.

Therefore, I am directing my redress to little water, a kind of vapor inside that port. When you have this, rinsing your Onewheel will not dry the water there, making it unsafe to charge it.

You will need to avoid charging your board until it dries. And this might take days! Charging your board might damage it through short-circuiting.


You will need Onewheel charge port covers to protect your charge port from sand and water.


Hi! I' am Tom. I faced many questions from customers about different products, and there was hardly any help on the internet. After learning all the things about these products as a manager the hard way, I decided to start a blog and help other people.

Recent Posts