Is Ninebot Kickscooter Max Waterproof?

Is Ninebot Kickscooter Max Waterproof?

Ninebot Kickscooter Max has an IP rating of IPX5.

The closest to the truth would be saying that the Ninebot Kickscooter Max scooter might stand its own against some amount of moisture or rain for some time.

Indeed, there are scores of different models of Segways and Ninebots out there, but none of them are meant for use in heavy snowfall or a downpour.

No, Ninebot Kickscooter is not fully waterproof, but it can withstand some level of water resistance. It has an IP rating of IP54. This is a below-average water resistance capability symbolized by the number 4.

Perhaps, some like the Ninebot Kickscooter can withstand light rain, splashing, and puddles – if they aren’t too deep.

You will be demanding too much from any of these products if you submerge them in water. None of these products is built to be used this way.

Therefore, if you were asking whether Ninebot Kickscooter Max is waterproof, now you know it isn’t.

But that should not spoil all the fun. You can still enjoy your Ninebot Kickscooter Max in light rain.

But I hope you have no intentions of using your Ninebot in the snow, and if you are, please be careful.

I mentioned that Ninebot Kickscooter Max has an IP rating of IPX5, but what in the world does that mean?

IP is “Ingress Protection,” or the unwanted introduction of foreign bodies, water, contaminants, etc.

The first number means “dust protection” (in our case, X because it’s not tested for dust protection), while the final number of 5 is the “waterproof rating.”

This is average (IP rating numbers start from 0 to 9, nine being the greatest) and means that it can take a few splashes and not anything more than that.

To understand that actual “waterproof” products have a 7-9 in the second numerical category.

As to whether you can leave your Ninebot out in the rain or not, I am afraid the answer is a big “NO!”

Is Ninebot Max G30 waterproof?

No, Ninebot Max G30 has an IP rating of IP54. This is a below-average water resistance capability symbolized by the number 4.

This is relevant because you can be lucky enough to ride in light rain and through shallow water puddles.

However, the best thing to do is to avoid water and puddles as much as you can.

Interestingly, Segway declares the scooter as water-proof and yet gives its IP rating correctly.

Do you know why they do this? It’s because they know most people don’t understand what these numbers mean.

It’s ironic to give the IP rating of an electric device as IP54 and then, in the same breath, declare it waterproof.

This is ridiculous! They know people do not even bother to know the difference between waterproof and water-resistant.

At best, Ninebot Max G30(Amazon Link) can be declared as having come from water resistance, though not in a reliable manner.  

Can You Ride A Segway In The Snow?

It depends on how it can handle water and snow. The first thing you need to note is that you have to consider the level of water-resistance of a Segway before riding it in the snow.

If it’s not water-resistant, you risk losing your hoverboard to electrical short-circuits. Water has never been friendly to any electrical circuits.

When it’s short-circuited, there will be damages to the electrical circuit. And this might be the beginning of your troubles.

I would advise you not to ride your Segway on any slippery surface, like ice (including black ice), wet grass, snow, oily and greasy areas, or wet floors.

But you might have a way to make your Segway water-resistant or even water-proof. Several DIY projects will make your Segway waterproof.

But even then, you can’t be free to ride your scooter on the ice or snow the way you want.

While you can ride your electric scooter over a surface with a little snow on the ground, it’s not recommended since it’s not safe.

If you do so, your ability to steer will be compromised, and your ability to brake as you can slip easily.

There will be better options to get to your destination like walking, taking a taxi, or even using public transportation.

But if you want to ride your Segway in the snow, it will be wise to take all the necessary precautions.

Can You Ride A Segway Ninebot In The Snow?

Yes, with the necessary precautions. As you might know, no scooter comes anywhere from being fully waterproof.

It’s only logical to feel comfortable driving your Segway in the snow if it’s waterproof.

But as of now, you will have to wait for that day to come since the closest a scooter gets in terms of waterproofing ability is IPX5.

But this is not badly off the mark, at least if you don’t treat your Segway Ninebot as waterproof (having an IP rating of IPX7 and above).

At IPX5, your Ninebot should be able to resist reasonable amounts of splashes and shallow puddles. Avoid submerging it in water since it might not withstand.

Have you ever wondered why Segway explicitly states that they don’t extend the warranty to water damage? It’s because all their products are not waterproof!

This should communicate loads to you if you have thought that your Ninebot is fully water-proof. 

Is Segway Ninebot S Plus Waterproof?

No, but it’s water-resistant to some level. If a device is water-resistant, it will withstand some splashes of water and some slight showers.

Even jets of water, depending on how water-resistant it is.

On the other hand, anything that is water-proof needs to have the ability to withstand water, up to and including the point of being submerged in water and retrieved safely.

As of now, there is no Segway that comes close to this. Our particular focus here is Segway Ninebot S. this electric scooter has an IP rating of IP54.

While the marketers will praise this scooter for its “amazing waterproofing characteristics,” nothing can be further from the truth.

No device on the earth is waterproofed with a rating of IP54. It won’t happen, can’t happen.

As insinuated earlier, waterproofing starts at IPX7 and above. So with a rating of 4, it’s not even average!

All the same, you can ride it on very shallow puddles and slight rains; nothing more as your Segway Ninebot won’t take more than this.  

There is no point in enjoying riding in the rain briefly, only to realize that you have damaged your scooter. And repair of these hoverboards is not cheap by any standards

What Is IPX4 Water-Resistant Mean?

When looking for any electric device to buy, you want to emphasize its IP rating, especially if it will be used outdoors or in wet weather conditions.

Therefore, if you have been looking for an electric item to buy and have just discovered some strange writings on it like IPX4.

You might have wondered what such letters and numbers mean in the world. Additionally, you might even have wondered about how they apply to your specific needs as a consumer.

I seek to answer this question in the following few sentences and help you find the best electrical device for your particular needs.

The IP in IPX symbolizes Ingress Protection.

Simply put, it’s the degree of protection a device has against what could harm the device by entering, such as dust, objects, and water.

Yes, IP ratings represent the degree of protection any electrical device has against solids and liquids.

The X in IPX4 refers to the degree of dust protection the device has; in this case, it’s not tested.

But the absence of tests conducted in this area does not mean that the device won’t protect against things like dust and solids;

It only means that there is a lack of quantifiable tests that have been administered on it.

On the other hand, the fourth character, in this case, the 4, represents the level of protection against liquids.

Since 4 is below the average (IP ratings start from 0-9), waterproofing wants, but the device has a level of water-proofing characteristics.

At best, any device with a water-resistant rating of 4 should be referred to as weatherproof.

How Long Does It Take To Charge Segway Ninebot S?

It will take between 3-4 hours to charge your Segway Ninebot S. this is wonderful, especially when you consider the experience that this powerful, personal transporter offers.

It offers a lot of power, too, for such a short charging time. With dual 800 Watt motors, your Segway Ninebot S will offer a maximum speed of 10 mph.

On a single charge of about 4 hours, you can expect a range of 13.7 miles. As mentioned, you have dual motors (800 W) that will deliver a total of 1600 W of power.

The battery powering these motors is quite reliable and capable of powering you even on slopes of up to 15°.

Can I Leave My Ninebot Charging Overnight?

Yes, it should be safe. Your Ninebot has lithium-ion batteries, which are internal and external. This is handy when it comes to how long the battery can last.

When your battery charges, there is no risk of overcharge. All modern electric devices come with smart charging technology to switch off the power once a device is fully charged.

But for the sake of feeling safe, many will want to unplug a charger when a device is fully charged. Trust me; it makes no difference at all.

Can You Overcharge Segway Ninebot?

In normal circumstances, it’s not easy to overcharge your Segway Ninebot. As mentioned already, almost all modern electric scooters come equipped with smart charging features.

These features are handy in protecting against overcharging and other related damages that emanate from overcharging.

But as you know, technology fails, and it might be possible to overcharge your Segway Ninebot, even with smart charging.

Consequently, the recommendation to unplug your scooter once charging is complete might resonate well with your pocket than taking any chances.

Since your Segway Ninebot will take about 5 hours to come to a full charge, it might not be a good idea to charge it overnight if you have concerns about the smart charging technology failing.

Why would you worry about something you can do easily? After all, there is nothing to lose when you unplug it after a full charge.

If the smart charging technology is working, fine; And this is the way we lived before this smart charging stuff came.

Remember the days you would time your phone and other electric devices to charge and unplug the charger fully? You can’t go wrong with these conventional ways of safety.

How Do You Increase Speed In 9bot Max?

You can modify the speed on your Ninebot Max. It’s not necessarily hard to accomplish as it requires no previous technical know-how or many tools.

Ninebot-Segway Max is one of the newest electric scooters boasting some cool 65 mileage and a 350W motor.

With the factory preset speed, you can comfortably travel the city.

Unfortunately, not all riders are satisfied with average speeds and loathe speed limits, especially if the limits have a low threshold.

That’s why many people are on the lookout for ways to hack the speed on their Ninebot Max. High speeds are reserved for speed lovers.

Indeed, some riders pursue the pleasure of speed. So, let me take you through the process of squeezing more miles per hour from your Ninebot Max.

There are a few items you will need in the pursuit of enhanced speed from your Ninebot Max.

You will need A Windows 10 PC with BLE, a Ninebot flasher, your Bluetooth-enabled Ninebot-Segway Max electric scooter, and an official or flashed ESx dashboard;

Perhaps extracted from any Ninebot ESx scooter. With these requirements and tools, it’s easy to unlock the top speed for your Ninebot Max.

First, turn off your Ninebot Max scooter, remove its dashboard, and unplug it from your scooter.

Swap its place with your ESx dashboard by plugging the latter into your Max and turning on your scooter.

The next thing to do will be to start your Ninebot-Flasher, connecting it to your scooter. This might push you back to the connecting screen, but no worries!

All you will need to do is to select your scooter again and then click Connect. From here, you will be required to Hit Ctrl+Alt+A to access buttons on your screen.

The buttons you will be on the lookout for will be “Write ESC Sn.” The other step is to replace your current Max serial number with the 5 first characters with N4GSD.

If that is the maximum speed you want. There are three maximum speeds you can choose from including, N4GSD for 30km/h, N4GEA for 20km/h, and N4GCD for 25km/h.

Conclusion

Ninebot Kickscooter is not fully waterproof, but it can withstand some level of water resistance.