What Is a Onewheel XR Range Extender?(Explained)

What Is a Onewheel XR Range Extender?

The Onewheel XR range is a great new way to experience long-distance travel using a hoverboard.

The speed can reach up to 18 miles per hour, the battery lasts up to 45 minutes, and its light weight makes it easy to transport from place to place.

This board is perfect for anyone wanting something new in urban transportation or looking for a way to spice up their commute.

Onewheel XR range extender is a device that helps in boosting your Onewheel XR range, extending the uninterrupted distance you can ride. Its purpose is to help you cover greater distances without running out of battery or needing to swap out batteries.

The range extenders boost power by motors and convert kinetic energy into electricity. This feeds the power back into the battery that runs your board.

They’re small and lightweight, so they will blend in with any backpack or bag while offering additional protection from bumps and other impacts while on the go.

Also, they take up very little space in your suitcase because of their small size, and they’ll sit safely in the bottom of your bag while riding.

Best of all, they are completely safe, and you don’t have to worry about them hitting anything while riding.

The XR range extenders are an excellent accessory for any Onewheel lover, especially those who have longer commutes or only sometimes have time to recharge their battery before going out on the board.

These devices also provide an additional power source when you may get stuck at work late and need more time to make it home without riding.

How Do I Extend the Range On My Onewheel XR?

The first method of extending the range on your Onewheel is plugging an external battery into your Onewheel through your charging port.

This will allow your Onewheel to have enough energy to last for a longer distance.

Second, you can purchase a 1200mAh battery or an upgraded XR controller from Onewheel with a built-in battery.

While these will only extend your range for about 15 minutes, it’s still useful when you need more power but don’t want any additional weight on your board.

The third method of extending your range is by using an extension cable. This will give you more power but in a much larger form factor.

This fourth method requires you to build new battery boxes for your Onewheel. The existing battery boxes are too small to hold bigger batteries.

This fifth method uses a single-board computer like the Raspberry Pi to control your Onewheel. This will allow you to use much bigger batteries without building new battery boxes.

The final method allows you to extend your range using a hub motor instead of a rear wheel.

Hub motors are much more efficient and powerful than regular motors to get the most power possible from their batteries.

What Is the Best Setting For Onewheel XR?

20 PSI is the ideal tire pressure for Onewheel XR, though it can range from 15-25 PSI. Lower tire pressure is better for rougher terrain, while higher pressure is better for smoother surfaces or steep inclines.

Although there are many different terrain types, you will typically ride the same terrain repeatedly.

The secret to good riding is to know how your Onewheel rides on a particular type of surface before you even get on it.

Standard settings for Onewheel XR: 20 PSI on smooth surfaces or 15 PSI for hard-packed dirt, sand, or frozen snow.

If you have trouble with traction or want more control, try increasing the tire pressure by 5 PSI. If you wish to float more over soft surfaces or climb sloped surfaces, try dropping the tire pressure by 5 PSI.

While riding, if you notice that your tires are spinning out or not rotating, it is because of high tire pressure.

You can lose speed quickly when traction is lost, so keeping your tire pressure low will help keep control of your Onewheel during all weather conditions.

Two-X Upgrade Kit

Feature	Explanation
Bluetooth Connectivity	Connectable with smartphones, GPS devices and voice controlled. You can connect the headset to your smartphone’s Bluetooth or a Bluetooth-supported device and use it as a hands-free device.
A Rugged Solution	Better performance in rugged environments (IP55), (IP54). Designed for extreme & harsh working conditions, Efficient in high and low temperatures from -30 ˚C ~ 55 ˚C.
Lightweight And Comfortable for Long Hours Of Use	As low as 1.2oz (36g) weight, Made with high quality, soft, and comfortable mesh headband for a more comfortable wearing experience.
Upgraded Noise-Canceling Technology	Noise reduction and crisp sound when you take calls. Enhanced Mic gain so that you can get a clearer and louder voice transmission to other devices.
Long Battery Life	Up to 12 hours daily use in the office and traveling. Bluetooth 4.0 consumes considerably less power than other Bluetooth devices.

Onewheel XR Charger Specs

Universal	110-220v.
Charging rate	2-8 Am
Measurements	227.5mm x 90mm x 56.5mm.
Weight	1.25 kg.

Introducing the latest and greatest in electric transportation, the Onewheel XR charger. This nifty little device has a universal voltage input so that you can charge anywhere, at any time.

It also has a 2-8 amp charging rate to give you the fastest charge possible. Plus, it’s small enough to fit in your bag, so you’ll always have it to charge up your Onewheel immediately.

The XR charger is compatible with all Onewheel models, both original and XR.

What Voltage Is The Onewheel Charger?

36v 4.4ah lithium polymer battery charger cord 36v output 12v input 4.4ah total power output for four-wheeler battery chargers produced by Onewheel.

For short-term charging, this charger is ideal. It’s small, lightweight, and easy to use. Perfect for travel and a great way to get started with electric scooters.

The downside is that the battery takes longer to charge than a larger charge, but it’s still much faster than other types of chargers available on the market.

This one should be able to charge your battery in less than 12 hours.

The charger has an input of 12V/1A and an output of 36V/2A with an output power of 4.4AH. There are many similar chargers on the market with this capacity.

Still, it’s best to start with the same one that comes with the Onewheel, at least until you know what you are doing with it and there are no compatibility issues with your charger.

The charger offers the following features:

• An input of 12V/1A and an output of 36V/2A with an output power of 4.4AH.
• Integrated charge controller, including battery temperature monitoring and fan control.
• Integrated USB input outputs a charging current up to 1A at 5V, providing a level 2 charge.
• Small size, lightweight and compact.
• Hands-free operation via voice prompt.
• Built-in rechargeable battery with integrated charge controller and a safety memory shut-off feature.

GT or XR?-Comparison of features

Factor	GT	XR
Weight	35lbs	29 lbs
The Size of the Wheelbase	11.5″ x 6.5-6.5″	11.5 x 6.5 inch
Wheel Height and Angle	9.5″30 degrees	8.75″,30 degrees
Tire size	11.5 x 6.5-6” tire.	11 x 5.5-6
Height of the Chassis from Ground to Wheel	1.25″	1.25″
Tire Pressure	Up to 20 PSI	20 PSI
Wheel Material	It is molded from super tough UHMW plastic	It has a high-density polyethylene
Motor Type	Motor Hub Motor	750W Hypercore Brushless Hub Motor
Drive System	Comes with solid-state MEMS 6-DOF sensors	Electric drive

How Cold Is Too Cold For Onewheel?

You cannot ride your Onewheel in the extreme cold despite your best efforts to protect it. You must keep it at 60°F (15°C) or above to be safe to ride.

The battery will drain quickly as your Onewheel cools, and temperatures below 40°F (4°C) will freeze the battery and other electronic components.

Cold weather is a killer for all sorts of electronics. No matter how good you are with insulation, your Onewheel can’t function well enough when it’s cold outside.

It doesn’t matter how much you’ve spent on expensive gear; it only works when it’s dangerously cold.

So, leave your board at home when the temperatures dip below freezing, and don’t even try to ride at temperatures below 40°F (4°C).

A 40-degree temperature is an ideal level for your Onewheel to perform well. At 60 degrees or higher, you can safely ride your Onewheel anytime, whether it’s raining, snowing, or the sun is shining.

If you live in a climate that gets cold, you’ll need to ride your Onewheel a few degrees warmer.

Since your Onewheel will get colder during winter riding conditions, I recommend riding at 48 degrees or above as the ideal temperature for your Onewheel during the summer months.

Of course, if it’s raining or snowing, get out of the elements, no need to freeze in the rain or ride through the snow in below-zero temperatures.

How Do You Stop Onewheel’s Wobble?

Take Breaks	When you feel Onewheel in your toes, get off and walk for a few seconds. When you must stop, lean back on your arms and lower them flat. If you get up quickly when Onewheel is engaging traction, try turning it 180 degrees, so the front wheel is now facing forward. Don’t move your feet or balance too much when visiting water or other slippery surfaces; this can cause wobble and instability.
Soften The Wheel Slicks	Put your easy-slick wheel on one of the top two speed settings: 3 for small and 4 for big wheels.  It will take a little effort to change the warping from a hard shell to a soft one, but it is worth it. Try to set up your wheel as flat on top as possible. Also, ensure plenty of space between the curb and your feet when you put it on slow speed. If you cannot get a flat surface on top, go to the bottom speed, which puts less of an angle on the wheel and will still give you a softer material than a hard shell requires.
Keep Your Feet Parallel	You can use your back feet to adjust your angle, but make sure that you bring both feet together when going forward. This helps keep the wheels parallel and makes shifting from one side or the other easier. If you have one foot fixed and the other toe is out of line, it will only exacerbate the wobble caused by uneven wheels.
Lean Forward	If you are leaning back, the wheel will put more pressure on your toes and tends to cause a wider arc that is less efficient and unstable.
Tighten Your Straps	Firmly tighten your straps, but be careful not to over-tighten them. Stand on the Onewheel with both feet and tighten to feels secure without putting too much pressure on your feet or toes.

Do 12v Lithium Batteries Need A Special Charger?

Yes! 12v lithium batteries need a special charger designed to function correctly. This also means you want to avoid mixing them up with any other types of batteries and charge them with a generic charger.

Understanding what makes 12v lithium batteries different from other 12v batteries is essential.

Lithium-ion battery chargers have the potential to function differently than those for nickel-metal-hydride or lead acid cells due to the complexity of their chemistry.

This is why you need a special charger explicitly designed for lithium-ion to ensure their proper functioning.

A lithium-ion charger has to boast the ability to detect the chemical makeup of the battery, ideally through a built-in microprocessor.

This processor can examine the charge it provides and determine what function you would require for optimum charging.

Only then will it be able to give a proper charge, utilizing amps that are safe regarding the battery’s chemistry.

Conversely, a generic charger will apply too many or too few amps, causing irreversible damage over time.

Without a processor, you must set up the charger to apply 1-2 amps per cell, a setting that will cause irrevocable damage over time if you use it on a lithium-ion battery.

Conclusion

Now that you have all the information, you should be ready to buy your first Onewheel. Remember that riding is fun, and you will have a blast.

Whether riding on concrete or dirt, knowing how to ride your Onewheel will make your experience much more enjoyable.